LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Timing Cover - Installation >> Rear Timing Belt Cover

Rear Timing Belt Cover







INSTALLATION





1. Clean rear timing belt cover O-ring sealing surfaces and grooves. Lubricate new O-rings with Mopar(R) Dielectric Grease or equivalent to facilitate assembly.
2. Position NEW O-rings on cover.




3. Install rear timing belt cover. Tighten bolts to the following specified torque:
- M10-54 Nm (40 ft. lbs.)
- M8-28 Nm (20 ft. lbs.)
- M6-12 Nm (105 in. lbs.)

4. Install camshaft sprockets Timing Belt & Sprockets - Installation.
5. Install timing belt Timing Belt & Sprockets - Installation.
scientia non olet · About LEMON Manuals