Valve - Exhaust Gas Recirculate: Installation: 3.5L

Fig 1: EGR Valve Gasket

Courtesy of CHRYSLER LLC

1. Install new exhaust gas recirculate (EGR) valve gasket to EGR valve.
   Fig 2: Identifying Solenoid, Flange Bolts, Tube, Gasket & Mounting Bolts

   Courtesy of CHRYSLER LLC
2. Install EGR valve (2), gasket and bolts (6) to cylinder head (1). Tighten to 30 N.m (22 ft. lbs.).
   Fig 3: Identifying Solenoid, Flange Bolts, Tube, Gasket & Mounting Bolts

   Courtesy of CHRYSLER LLC
3. Install new gasket (5), EGR tube (4) and bolts (3) to EGR valve (2). Tighten to 15 N.m (11 ft. lbs.).
   Fig 4: Identifying EGR Valve, Right Cylinder Head, Flange Mounting Bolts, Exhaust Gas Routing Tube & Electrical Connector

   Courtesy of CHRYSLER LLC
4. Connect electrical connector (6) to EGR valve (1).
5. Connect negative battery cable, tighten nut to 5 N.m (45 in. lbs.).