LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> 300 SRT-8 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor - Inlet Air Temperature >> Installation >> Sensor - Inlet Air Temperature - 6.1L

Sensor - Inlet Air Temperature - 6.1L

Fig 1: Remove/Install IAT Sensor - 6.1L
GC0039507Courtesy of CHRYSLER LLC
  1. Connect electrical connector (1) to sensor (2).
  2. Press sensor into rubber air hose. Mate the notches. Be careful not to bend or damage probe (3).
scientia non olet · About LEMON Manuals