LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine >> Oil Cooler & Lines >> Installation >> Pressure Control Valve

Pressure Control Valve

  1. Install supply line fitting into engine block (Figure). Tighten fitting to 30 N.m (260 in. lbs.).
  2. Position control valve into fitting. Push valve into fitting until it locks in place. Ensure proper connection is made by pulling in-and-out on valve.
  3. Connect supply line to control valve. Tighten connection fitting to 30 N.m (260 in. lbs.).
scientia non olet · About LEMON Manuals