DTC P0443: EVAP Purge Solenoid Circuit: Notes
WARNING:
When performing test procedures, keep lighted cigarettes, sparks, flames or other ignition sources away from test area. Ensure test area is well ventilated. Ensure fuel tank is at least 1/2 full and contains at least 3 gallons of fuel before performing the following test procedures. Pressurizing fuel tank with less than 3 gallons of fuel may result in an explosion caused by ignition of the fumes. Wear safety glasses when performing test procedures.
NOTE:
After making repairs for DTC P0443, perform TEST VER-2A: ROAD TEST FOR NON-OBD II
.