Circuit/System Verification

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Perform a Restraints Occupant Classification System Module Programming and Setup procedure whenever the seat trim is removed or the component is replaced.

Verify that DTC B1A35 is not set in the K36 Restraints Control Module.
- If DTC B1A35 is set in the K36 Restraints Control Module.
  Diagnose and Repair the cause of DTCs within the K85P Restraints Occupant Classification System. Do not replace K36 Restraints Control Module if this DTC is current.