Driver Information Indicator

Brake Warning Indicator

The instrument cluster turns five brake warning indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module detects some faults, such as more than two wheel speed sensors are defective or the failure relating to the basic brake system occurs and sends a serial data message to the instrument cluster requesting illumination.
• The park brake is engaged or the brake fluid level is low.

ABS Warning Indicator

The instrument cluster turns the ABS warning indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module detects a malfunction which disables the ABS and sends a serial data message to the instrument cluster requesting illumination.

Traction Control System/Stability Control System Warning Indicator

The instrument cluster turns the traction control system/stability control system warning indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The electronic brake control module detects a malfunction which disables the traction control or stability control and sends a serial data message to the instrument cluster requesting illumination.

Traction Control System OFF Indicator

The instrument cluster turns the Traction Control Off indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The driver manually disables the traction control by pressing the traction control switch one time and releasing it. The body control module and electronic brake control module sends a serial data message to the instrument cluster requesting illumination.
• The electronic brake control module detects a malfunction which disables the traction control and sends a serial data message to the instrument cluster requesting illumination of the Traction Control Off indicator.

Stability Control System OFF Indicator

The instrument cluster turns the Stability Control Off indicator ON when the following occurs:

• The instrument cluster performs the bulb check.
• The driver manually disables the stability control by pressing an holding the traction control switch down for five seconds. The electronic brake control module sends a serial data message to the instrument cluster requesting illumination.
• The electronic brake control module detects a malfunction which disables the stability control system it sends a serial data message to the instrument cluster requesting illumination of the Stability Control Off indicator.