LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions >> Repair Instructions >> Evaporative Emission Pipe Replacement (L5Q) >> Installation Procedure

Installation Procedure

  1. Install the evaporative emission pipe (3) to the vehicle.
    Fig 1: Evaporative Emission Pipe
    GM4013964Courtesy of GENERAL MOTORS COMPANY
  2. Install the evaporative emission pipe (3) to the retainers (1).
  3. Connect the evaporative emission pipe fitting (2) to the evaporative emission canister purge pipe at the tank. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the evaporative emission pipe (2) to the retainers (1).
    Fig 2: Evaporative Emission Pipe And Retainers
    GM4013963Courtesy of GENERAL MOTORS COMPANY
  5. Lower the vehicle.
  6. Install the evaporative emission pipe fitting (1) to the fuel rail. Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 3: Evaporative Emission Pipe Fitting And Evaporative Emission Canister Purge Solenoid Valve
    GM4013904Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals