Circuit/System Verification
- Vehicle in service mode.
- Verify DTC C056D 36 is not set.
- If DTC C056D 36 is set
- Program the K83 parking brake control module. Refer to Electronic Parking Brake Control Module Programming and Setup .
- Vehicle in service mode. Apply and release the park brake.
- Verify the DTC is not set.
- If the DTC is set,
replace the K83 parking brake control module.
- If the DTC is not set
- If the DTC is set,
- All OK.
- If DTC C056D 36 is not set
- Perform the Parking Brake Actuator DTC Reset procedure with a scan tool for the parking brake control module.
- Verify DTC C056D is not set.
- If DTC C056D is set
Replace the K83 parking brake control module.
- If DTC C056D is not set
- If DTC C056D is set
- All OK.