LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> TrailBlazer 4.2 S, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.2L - Introduction >> Repair Instructions >> Camshaft Position Actuator Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Remove the 3 power steering pump bolts and move the pump out of the way. Refer to Power Steering Pump Replacement (4.2L) or Power Steering Pump Replacement (Except 4.2L) .
  3. Disconnect the camshaft position actuator solenoid electrical connector.
    4. Fig 1: View Of CMP Actuator Solenoid Valve
    GM744600Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft position actuator solenoid retaining bolt (3).
  5. Remove the camshaft position actuator solenoid (2) from the engine block.
  6. Clean debris from the hole (1).
scientia non olet · About LEMON Manuals