Installation Procedure

WARNING: This page is about a different car, the 2006 Isuzu Ascender, 2006 GMC Envoy XL, 2006 GMC Envoy, 2006 Chevrolet TrailBlazer, and 2006 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing/Installing Rear Coil Springs

Courtesy of GENERAL MOTORS CORP.

Install the rear coil springs.
Raise the rear axle.

Fig 2: View Of Shock Absorber Lower Mounting Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the shock absorber lower mounting bolts.
Tighten: Tighten the shock absorber lower mounting bolts to 80 N.m (59 lb ft).
Remove the rear axle support.
Lower the vehicle