LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Malibu Maxx LS >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Side Impact Module Wiring Harness Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Side Impact Module Wiring Harness
    GM1506504Courtesy of GENERAL MOTORS CORP.
  1. Install the new side impact module wiring harness (1) to the seat.
  2. Install the retaining clips that fasten the side impact module wiring harness (1) to the seat.
  3. Install the side impact module to the seat. Refer to INFLATABLE RESTRAINT SIDE IMPACT MODULE REPLACEMENT - FRONT .
  4. Enable the SIR system. Refer to SIR DISABLING AND ENABLING ZONE 7  for driver's seat or SIR DISABLING AND ENABLING ZONE 9  for passenger seat.
scientia non olet · About LEMON Manuals