LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure

Installation Procedure

  1. Position the washer solvent container to the right inner fender.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    2. Fig 1: View Of Washer Pump Components
    GM512031Courtesy of GENERAL MOTORS CORP.
  2. Install the washer solvent container screws.

    Tighten:  Tighten the screws to 6 N.m (53 lb in).

  3. Connect the rear washer pump hose if equipped.
  4. Connect the front washer pump hose.
  5. Connect the rear washer pump electrical connector if equipped.
  6. Connect the front washer pump electrical connector.
  7. Install the wiper motor electrical harness to the washer solvent container.
  8. Install the battery. Refer to Battery Replacement in Engine Electrical.
  9. Fill the washer solvent container with washer solvent.
scientia non olet · About LEMON Manuals