Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Install the seat back bumper on to the mounting studs.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the seat back bumper nuts.
Tighten: Tighten the nuts to 10 N.m (88 lb in).

Fig 1: Identifying Seat Back Bumpers Fastener Covers

Courtesy of GENERAL MOTORS CORP.

Install the seat back bumper covers (1) on to the seat back bumper.