LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Optra Base, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Repair Instructions >> Rack and Pinion Gear Preload Bearing Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying J 42459
    GM1290254Courtesy of GENERAL MOTORS CORP.
  1. Remove the rack and pinion steering assembly from the vehicle. Refer to Steering Gear Replacement .
  2. Remove the adjuster plug locknut from the adjuster plug and remove the adjuster plug from the housing with J 42459  (1), or with a 19 mm Allen wrench. See Special Tools .
    3. Fig 2: Identifying Adjuster Spring And Rack Bearing
    GM1290255Courtesy of GENERAL MOTORS CORP.
  3. Remove the adjuster spring and the rack bearing.
scientia non olet · About LEMON Manuals