LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Cushion Frame Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cushion Frame Components
    GM820496Courtesy of GENERAL MOTORS CORP.
  1. Install the adjusters (2) to the cushion frame (8).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the seat adjuster bolts (9) to the cushion frame (8).

    Tighten:  Tighten bolts to 25 N.m (18 lb ft).

  3. Install the seat back assembly to the cushion frame (8).
  4. Install the seat back recliner bolts (5).

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  5. Install the recliner cable to the cushion frame (8).
  6. Install the wire harness rosebud retainer to the cushion frame, if equipped with power seats.
  7. Install the power seat switch bracket to the cushion frame (8), if equipped. Install the power seat switch bracket screw.

    Tighten:  Tighten the screws to 5 N.m (44 lb in).

  8. Install the front seat cushion cover and pad to the seat cushion frame. Refer to Seat Cushion Cover Replacement - Front .
scientia non olet · About LEMON Manuals