LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting Systems >> Repair Instructions >> Module Replacement - Panel Dimming >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector (1) to the I/P dimmer module (2).
  2. Install the I/P dimmer module (2) to the HVAC bracket.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the I/P dimmer module bolts (3).

    Tighten 

    Tighten the bolts to 2.3 N.m (20 lb in).

  4. Install the left closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages, and Console.
    Fig 1: Installing I/P Dimmer Module To HVAC Bracket
    G01594613Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals