Installation Procedure
- Install the fixed antenna cable/base (3).CAUTION: Refer to FASTENER NOTICE .
- Install the antenna cable/base mounting bolts (4).
Tighten
Tighten the antenna cable/base mounting bolts (4) to 11 N.m (97 lb in).
- Route the antenna base cable under the A/C case and through the hole in the firewall.
- Install the antenna cable grommet (5) through firewall and seat the grommet (5).
- Install the antenna collar (2).
- Connect the antenna base cable to the antenna extension cable.
- Install the passenger side hinge pillar trim. Refer to TRIM REPLACEMENT - HINGE PILLAR .
- Install the antenna mast (1). Refer to Fixed Antenna Mast Replacement .