LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Repair Instructions >> Rear Camber Adjustment >> Removal Procedure

Removal Procedure

  1. Raise the vehicle and provide suitable support.
  2. Remove the tire and wheel assemblies.
  3. Remove the strut from the vehicle. Refer to STRUT ASSEMBLY REPLACEMENT .
  4. Place the strut in a vise and file the upper strut-to-knuckle hole lateral - oblong. Compare the appearance of the holes before filing (2) with after filing (3).
    Fig 1: Filing Lower Strut-To-Knuckle Attaching Holes
    G01571974Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals