Installation Procedure

Important:  Remove any twists in the seat belt webbing before final assembly.

1. Insert the top of the seat belt retractor into the T-slot. Push down the top of the retractor to engage the retractor with the T-slot in the center pillar.
2. Install the seat belt retractor bolt. Tighten the bolt to 42 N.m (31 ft lbs).
3. Install the left carpet retainer.
4. Install the shoulder belt guide bolt. Tighten the bolt to 28 N.m (21 ft lbs).
5. Push down on the shoulder belt guide cover until fully seated.
6. Install the seat belt anchor bolt. Tighten the bolt to 42 N.m (31 ft lbs).
7. Install the seat belt sleeve anchor plug.
8. Inspect left front seat belt retractor for proper operation. Refer to Operational & Functional Checks .