LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Lumina >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Shift Cable (At Manual Control Lever) >> Installation

Shift Cable (At Manual Control Lever): Installation

  1. If installing NEW cable, see SHIFT CABLE (NEW CABLE INSTALLATION ONLY)  . If reinstalling used cable, go to next step.
  2. Insert the shift cable through the dash from the engine compartment side. Install the shift cable to the bracket. See Figure .
  3. Install the shift cable to the manual control lever. See Figure . Install the shift cable to the wiring harness clip. Install the shift cable to the column shift control.
  4. Adjust the shift cable. See SHIFT CABLE  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals