Rear Side Door Window Weatherstrip Replacement (Short Wheelbase)

Fig 1: Rear Side Door Window Weatherstrip (Short Wheelbase)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Glass and Sheet Metal Handling Warning . WARNING: Refer to Express Window Down Warning . Preliminary Procedures Remove the rear side door window inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement (Short Wheelbase) . Remove the rear side door pull handle bracket. Refer to Rear Side Door Pull Handle Bracket Replacement . Remove the rear side door water deflector. Remove the rear side door window belt reveal molding. Refer to Rear Side Door Window Belt Reveal Molding Replacement (Short Wheelbase) .
1	Rear Side Door Window Weatherstrip Screw CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Rear Side Door Window Weatherstrip Bolt Plug
3	Rear Side Door Window Weatherstrip Bolt Tighten 11 N.m (97 lb in)
4	Rear Side Door Window Weatherstrip Procedures Grasp both upper corners of the window weatherstrip, pull downward releasing it from the door frame. Insert the weatherstrip downward in the guide until fully seated. Position the weatherstrip in the upper rear corner of the frame, working the weatherstrip around the door frame. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guides. NOTE: Inspect the door window for proper operation before installing the door trim.