Rear Side Door Window Replacement (Long Wheelbase)

Fig 1: Rear Side Door Window (Long Wheelbase)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Glass and Sheet Metal Handling Warning . WARNING: Refer to Express Window Down Warning . Preliminary Procedure Remove the rear side door window weatherstrip. Refer to Rear Side Door Window Weatherstrip Replacement (Long Wheelbase) .
1	Rear Side Door Window Regulator Guide Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Use masking tape, tape off the outer door frame and applique to prevent scratching. Lower the window to align the guide bolts with the access holes in the inner door panel. Remove the access hole plugs in the inner door panel, if equipped. Loosen the bolts that attach the window to the window regulator guides. Tighten 11 N.m (97 lb in)
2	Rear Side Door Window Procedure In order to remove the window out of the frame, carefully grasp and tilt the window as you guide the window up and forward. Install the window to the guide. Do not operate the regulator motor without supporting the window. Ensure that the window remains in the guide when operating the regulator motor. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guide. Tighten the bolts to the window guide. NOTE: Inspect the door window for proper operation before installing the door trim.

Callout

Component Name

WARNING:

WARNING:

Preliminary Procedure Remove the rear side door window weatherstrip. Refer to Rear Side Door Window Weatherstrip Replacement (Long Wheelbase) .

Rear Side Door Window Regulator Guide Bolt (Qty: 2)

CAUTION:

Procedure

Use masking tape, tape off the outer door frame and applique to prevent scratching.
Lower the window to align the guide bolts with the access holes in the inner door panel.
Remove the access hole plugs in the inner door panel, if equipped.
Loosen the bolts that attach the window to the window regulator guides.

Tighten
11 N.m (97 lb in)

Rear Side Door Window

Procedure

In order to remove the window out of the frame, carefully grasp and tilt the window as you guide the window up and forward.
Install the window to the guide.
Do not operate the regulator motor without supporting the window. Ensure that the window remains in the guide when operating the regulator motor.
Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guide. Tighten the bolts to the window guide.

NOTE:

Inspect the door window for proper operation before installing the door trim.