LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction, Specifications & Repair Instructions >> Repair Instructions >> Charge Air Bypass Regulator Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Supercharger Bypass Solenoid Valve Electrical Connector & Line Fittings
    GM1614014Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
  2. Disconnect the electrical connector (3) from the supercharger bypass regulator solenoid valve (2).
  3. Disconnect the vacuum line fittings (4, 5) from the supercharger bypass regulator solenoid valve.
  4. Remove the supercharger bypass regulator solenoid valve from the bracket.
  5. Remove the bolt (1) and bracket if necessary.
    6. Fig 2: Identifying Vacuum Supply Line & Fittings
    GM1614017Courtesy of GENERAL MOTORS CORP.
  6. Inspect the bypass regulator solenoid valve vacuum supply line and fittings (1, 2). Replace the vacuum line if necessary.
    7. Fig 3: Identifying Bypass Valve Actuator Vacuum Line & Fittings
    GM1614019Courtesy of GENERAL MOTORS CORP.
  7. Inspect the bypass regulator solenoid valve to bypass valve actuator vacuum line and fittings (1, 2). Replace the vacuum line if necessary.
scientia non olet · About LEMON Manuals