LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Front Suspension System) >> Repair Instructions >> Front Wheel Bearing and Hub Replacement (RWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake rotor. Refer to Front Brake Rotor Replacement .
    Fig 1: View Of Wheel Speed Sensor Electrical Connector
    GM906772Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the ABS electrical connector.
  5. Remove the electrical connector from the splash shield.
    Fig 2: View Of Wheel Bearing/Hub Assembly
    GM904542Courtesy of GENERAL MOTORS CORP.
  6. Remove the wheel bearing/hub mounting bolts.
  7. Remove the wheel bearing/hub.
scientia non olet · About LEMON Manuals