Removal Procedure
IMPORTANT:
Components of the DVD player cannot be serviced separately. Replace as an assembly.
- Move the screen to the open position.
- Remove the rear screw cover using a flat bladed tool.
- Remove the four retaining bolts (2).
- Insert the J 38778 between the headliner and the DVD player assembly. See Special Tools .
- With 1 hand holding the DVD player assembly, pry the retainer from the bracket.
- Allow the DVD player assembly to come to rest on the hook.
- Disconnect the wire connector (1).
- Slightly lift up the DVD player assembly so that the hook can be removed from its resting position.
- Remove the DVD player from the vehicle.
IMPORTANT:
Observe the routing of the wiring harness (2).