Removal Procedure

IMPORTANT: This vehicle is equipped with express up, torque sensitive window on the front door windows.

When the battery or the power has been removed from the front door module, the front door module will need to be reprogrammed after power is restored and all repairs are completed.

Remove the door trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE FRONT DOOR .
Remove the drivers door module. Refer to DOOR CONTROL MODULE REPLACEMENT .
Remove the nine retainers by depressing the center pins in order to release the retainers.

Fig 1: Removing Retainers & Water Deflector
Courtesy of GENERAL MOTORS CORP.
Disengage the wiring harness grommet.
Pull the wiring harness through the hole in the water deflector.
Remove the water deflector.