LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> CTS Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System >> Repair Instructions >> Afterboil Coolant Pump Replacement >> Installation Procedure

Installation Procedure

  1. Install the afterboil coolant pump.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the afterboil coolant pump bolts (1).

    Tighten 

    Tighten the bolts to 10 N.m (89 lb in).

  3. Connect the afterboil coolant pump electrical connector (2) to the afterboil coolant pump (3).
    Fig 1: Connecting Afterboil Coolant Pump Electrical Connector
    G02086649Courtesy of GENERAL MOTORS CORP.
  4. Connect the hose to the afterboil coolant pump.
  5. Using the J 38185  slide the hose clamp (1) back into the original position on the hose.
    Fig 2: View Of Afterboil Coolant Pump Hose & Clamp
    G02086650Courtesy of GENERAL MOTORS CORP.
  6. Connect the hose to the afterboil coolant pump.
  7. Using the J 38185  slide the hose clamp (1) back to the original position on the hose.
    Fig 3: Locating Afterboil Coolant Pump Hose & Clamp
    G02086651Courtesy of GENERAL MOTORS CORP.
  8. Fill the coolant. Refer to DRAINING AND FILLING COOLING SYSTEM  .
scientia non olet · About LEMON Manuals