Installation Procedure
Starter (2) - Install
- Starter Bolt (1) - Install and tighten 25 N.m (18 lb ft) [2x]
Battery Positive Cable - Reposition
- Starter Lead Nut (2) - Install and tighten 12.5 N.m (111 lb in)
- Electrical Connector (1) - Connect
- Exhaust Front Pipe - Remove - Exhaust Front Pipe Replacement (LTG AWD) , or Exhaust Front Pipe Replacement (LTG FWD)
- Lower the vehicle.
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (2.0L LTG)
CAUTION: