LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Disc Brake System) >> Repair Instructions >> Rear Brake Rotor Replacement

Rear Brake Rotor Replacement

WARNING: This page is about a different car, the 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
GM4741971
Callout Component Name

Preliminary Procedures

    NOTE:

    Do NOT disconnect the brake hoses from the calipers.

  1. Remove the brake caliper assembly and support with heavy mechanics wire. Rear Brake Caliper Replacement (GNC) Rear Brake Caliper Replacement (GNQ) 
  2. Rear Disc Brake Pads Replacement (GNC) Rear Disc Brake Pads Replacement (GNQ) 
  3. Rear Brake Caliper Bracket Replacement (GNC) Rear Brake Caliper Bracket Replacement (GNQ) 
1 Rear Brake Rotor Bolt
Tighten 
9N.m (80 lb in)
2 Rear Brake Rotor

Procedure

  1. Whenever the brake rotor has been separated from the hub/axle flange, any rust or contaminants should be cleaned from the hub/axle flange and the brake rotor mating surfaces.
  2. Always replace brake rotors in axle sets. After brake rotor replacement it is essential to replace the brake pads in axle sets.