13 62 650 Replacing pulse sensor for camshaft (N57 D30 O/T 1)

Necessary preliminary tasks:

Detach plug from pressure regulator (1).

Detach the connector (2) from injector for cylinder 6.

Unlock plug (3) from pulse generator and detach.

Fig 1: Identifying Pressure Regulator, Connector And Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 13 62 1AZ .

Remove pulse sensor.

Fig 2: Identifying Pulse Sensor Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace sealing ring (1). Apply a thin coat of lubricant to sealing ring for installation.

Fig 3: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Reassemble the vehicle.

Delete fault memory.

Check function of DDE.