13 62 605 Replacing pulse generator on right exhaust camshaft

(cylinder bank 1 to 4)

Necessary preliminary tasks:

Read out fault memory of DME control unit; if necessary, work through test schedules.
Switch off ignition.
Release and raise coolant expansion tank. Do not kink hoses.
Remove right ignition coil cover.

Release plug connector (1) and pull off.

Release screw.

Remove pulse generator (2).

Installation:

Aluminum screws must always be replaced.

Replace sealing ring and coat with antiseize agent.

Tightening torque, 13 62 5AZ .

Fig 1: Identifying Plug Connector And Pulse Generator (Cylinder Bank 1 To 4)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Now clear the fault memory.