11 22 500 Removing And Installing Or Replacing Flywheel (M52/S52/M52TU/M54/S54)

Special Tools Required: 

• 11 2 170

(Clutch removed)

Lock flywheel with special tool 11 2 170.

Unfasten screws and remove flywheel.

Installation: 

1. Check dowel sleeve for damage and correct installation position.
   Fig 3: Locating Dowel Sleeve

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Position of dowel sleeve (1) in dual-mass flywheel is identified by two notches next to associated bolt hole.
   Fig 4: Locating Position Of Dowel Sleeve In Dual-Mass Flywheel

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

1. Clean thread and install new micro-encapsulated screws.
2. Tightening torque, refer to 11 22 1AZ in ENGINE - TIGHTENING TORQUES .
   Fig 5: Identifying Flywheel Retaining Screws

   Courtesy of BMW OF NORTH AMERICA, INC.