61 31 299 Removing and installing/replacing clutch switch module

Necessary preliminary tasks: 

• Remove trim panel for pedal assembly. Refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Lever out clutch switch module (1) from clutch master cylinder (2) with screwdriver.

Fig 1: Removing Clutch Switch Module From Clutch Master Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (4) and disconnect from housing (3).

Installation: 

Clutch switch module is protected against incorrect installation.

Clutch switch module must snap audibly into place.

Fig 2: Identifying Clutch Switch Module Installation Position

Courtesy of BMW OF NORTH AMERICA, INC.