Electronic Torque Wrenches (04 29 03)

Publication date: 2006-05-02
Reference number: 04 29 03

ELECTRONIC TORQUE WRENCHES

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B 04 29 03, Date of Issue: May 2, 2006

BMW:	All
GROUP:	Tools and Equipment

Superceded Bulletin(s): S.I. B04 29 03, Date of Issue: April 2004

NOTE: This Service Information bulletin supersedes S.I. B04 29 03 dated April 2004.

SUBJECT

Electronic Torque Wrenches

SITUATION

Distribution of the following tools will not be through the Automatic Tool Shipment Program. Tools may be purchased through your PDC.

TOOL INFORMATION

Electronic Torque wrench

PN 81 64 0 142 874

Used with various BMW square drive attachments to accurately torque fittings. This model covers torques from 2-100 nm.

Fig 1: Electronic Torque Wrench

Electronic Torque wrench

PN 81 64 0 142 875

Used with various BMW square drive attachments to accurately torque fittings. This model covers torques from 20-200 nm.

Fig 2: Electronic Torque Wrench

Torque wrench battery charger

PN 81 64 0 142 876

Used with the above torque wrenches to charge the batteries. Only one piece required. This is a universal charger capable of several voltages. The unit comes with 6 adapters. Read the direction carefully before charging any batteries.

Set the charger on the 12 volt setting
Use the green plug end
Align the "TIP" and the "+" on the plug
Red LED flashes when the battery runs low.

Replacement batteries may be ordered from the Parts department using PN 81 64 0 417 654.

WARRANTY INFORMATION

Refer to Parts Information bulletin 01 01 95 for tool warranty details.