Cd Changer: Removing
The lines to the CD changer MOST BUS are kept short.
Before removing the CD changer, the MOST BUS connector on the changer must be disconnected.
There is a service cover on the bottom side of the glove compartment for changing the climate control system pollen filter. If the service cover is removed, the connectors on the CD changer -R41- can be disconnected.
If there is no service cover, the glove compartment must be removed. Refer to GLOVE COMPARTMENT .
The service cover -A- is secured with 4 retainers -C- to the bottom of the glove compartment -B-. The retainers may be difficult to loosen.
-- Loosen the retainers -C- and remove the service cover -A-.
-- Disconnect all connectors on the CD changer.
-- Attach the VAS 6223/9 -1- onto the MOST-Bus connector -2-.
-- Open glove box.
-- Insert two clips on T10057 in release slits on CD changer until they engage. Points on the grip eyelets of tool face outward.
-- Remove CD changer from mounting frame.
-- Remove T10057, push locking tabs on CD changer to do so.