LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1995 >> 90 Base, 2.8 K, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starters >> Trouble Shooting >> Starter Does Not Crank Engine

Starter Does Not Crank Engine

NOTE: On A/T vehicles, also check park/neutral switch.
  1. Ensure battery is fully charged, engine-to-body ground strap is connected and all cable connections are clean and tight. With ignition switch in crank position, check voltage at starter solenoid wire terminal. If reading is 8 volts or greater, go to step 3). If reading is less than 8 volts, go to next step.
  2. Check voltage at Black/Yellow wire terminal of ignition switch. If reading is at least 8 volts, repair circuit between ignition switch and starter solenoid. If reading is less than 8 volts, replace ignition switch.
  3. With ignition switch in start position, check voltage at bottom (armature) terminal of starter solenoid. If reading is at least 8 volts, repair or replace starter. If reading is less than 8 volts, replace starter solenoid.
scientia non olet · About LEMON Manuals