LEMON Manuals: Even more car manuals for everyone
Home >> Alfa Romeo >> 2020 >> 4C Spider Italia >> Repair and Diagnosis >> Maintenance >> Procedures >> Vehicle Quick Reference >> Jump Starting >> Standard Procedure >> Standard Procedure - Jump Starting >> Connecting The Jumper Cables

Connecting The Jumper Cables

GC0167732Courtesy of CHRYSLER GROUP, LLC
  1. Connect the positive (+) end of the jumper cable to the positive (+) post of the vehicle with the discharged battery.
  2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery.
  3. Connect the negative end (-) of the jumper cable to the negative (-) post of the booster battery.
  4. Connect the opposite end of the negative (-) jumper cable to a good engine ground of the vehicle with the discharged battery (exposed metal part of the engine) away from the battery and the fuel injection system.
  5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery.
  6. Once the engine is started, remove the jumper cables in the reverse sequence.
scientia non olet · About LEMON Manuals