MTR_CUT2(IG1), GND Open Wire Inspection

Test Procedure 

• Preparation
• • Electric steering lock connector (12P): disconnected
  • Body control module connector C (66P): disconnected
• Procedure
• • Perform the inspection according to the following table.

(Disconnected) Electric steering lock connector (12P) female terminals

(Disconnected)Body control module connector C (66P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

MTR_CUT2(IG1) open wire inspection 

OFF

There is less than 1 Ω 

GND open wire inspection 

OFF

There is less than 1 Ω 

Results 

• If abnormal, there is a problem in the circuit.