TP Sensor Inspection
NOTE:
Since there is no direct method to test the component itself, troubleshooting is performed on the related components.
Test Procedure
- Preparation
-
- -
Throttle body 6P connector: disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected) Throttle body 6P connector female terminals
IG Mode
Normal Conditions
Unit output voltage inspection
ON
About 5.0 V
Results
- If it is normal, there is a problem with the throttle body.
- If it is abnormal, there is a problem with other related components.