Power Supply (VB1) Circuit Inspection

Test Procedure 

• Preparation
  • TCM connector A (23P) : disconnected
• Procedure
  • Perform the inspection according to the following table.

    			(Disconnected) TCM connector A (23P) female terminals
    		IG Mode	Courtesy of HONDA, U.S.A., INC.	Normal Conditions
    	VB1 circuit inspection	OFF		12 V battery voltage [ circuit type 1 ]

Results 

• If abnormal, there is a problem in the circuit.
  NOTE:

  If the result is not in the normal condition while in the power supply inspection, refer to the Power Supply Inspection , then specify the failure part.

• If normal, there is a problem with the TCM.