LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Audio System) >> Speaker Test/Replacement >> Rear Speaker

Rear Speaker

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear shelf (see TRIM REMOVAL/INSTALLATION - REAR SHELF AREA ).
  2. Remove the three mounting screws from the rear speaker (A).
    Fig 1: Identifying Mounting Screws From Rear Speaker
    G05463099Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 2P connector (B), and remove the rear speaker.
  4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 Ω.
  5. If the resistance is not as specified, replace the rear speaker.
    NOTE: Align the speaker on the locating tabs (A) of the mounting grommet.
    Fig 2: Aligning Speaker On Locating Tabs
    G05463100Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals