Front Seat Disassembly/Reassembly - Passenger's
SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ), and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) in the SRS section before performing repairs or service.
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Disassemble the seat as shown. The driver's seat without manual height adjustment is symmetrical except it has no OPDS harness.
Reassemble the seat in the reverse order of disassembly, and note these items:
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.