Audio-HVAC Display Panel Disassembly/Reassembly

Remove the audio-HVAC display panel (see AUDIO-HVAC DISPLAY PANEL REMOVAL/INSTALLATION ).
Remove the mounting screws and the cover (A).
Without navigation

Fig 1: Identifying Mounting Screws And Cover (Without Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

With navigation

Fig 2: Identifying Mounting Screws And Cover (With Navigation)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
With navigation system: Remove the mounting screws and disconnect the connectors (A) from the circuit board (B), then remove the circuit board from the display unit (C).

Fig 3: Identifying Connectors, Circuit Board And Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
With navigation system: Remove the mounting screws and the display unit (D).

Fig 4: Identifying Mounting Screws And Display Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Without navigation system: Remove the mounting screws, then remove the printed circuit board (A).

Fig 5: Identifying Mounting Screws And Printed Circuit Board
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the audio unit and printed circuit board in the reverse order of removal.