Right Mirror Inoperative
- Connect a jumper wire between power mirror switch connector terminal No. 6 (Yellow/Black wire) and terminal No. 9 (Brown wire). See Fig 1. Connect a jumper wire between terminal No. 8 (Blue wire) and ground. Right mirror should tilt down. If mirror does not tilt down, check for open in Blue wire. See WIRING DIAGRAMS . If wire is okay, go to next step.
- Move jumper wire from terminal No. 5 (Blue wire) to terminal No. 8 (Yellow wire). Right mirror should swing left. If mirror does not swing left, check for open in Yellow wire. If wire is okay, check right mirror motor. See POWER MIRROR MOTOR TEST under COMPONENT TESTS. If mirror does not tilt down and does not swing left, check for open in Brown wire. See WIRING DIAGRAMS . If mirror operates properly, check power mirror switch. See POWER MIRROR SWITCH TEST under COMPONENT TESTS.
Courtesy of AMERICAN HONDA MOTOR CO., INC.