Outer CV Joint-Correct Spline Distance Specification (ASN 0493-04)

Publication date: 1993-04-01
Reference number: ASN 0493-04

OUTER CV JOINT-CORRECT SPLINE DISTANCE SPECIFICATION

TECHNICAL SERVICE BULLETIN

Reference Number(s): ASN 0493-04, Date of Issue: April, 1993

1992-93 ACURA INTEGRA OUTER CV JOINT NOTES

Model(s): 1992-93 Acura Integra

Group: Drivetrain

Bulletin No.: ASN 0493-04

Date: April, 1993

SERVICE INFORMATION

When replacing an outer CV joint on a 1992-93 Integra, do not use the specs from the CV joint kit instructions. The instructions are correct for the 1990-91 models, but the splined portion of the 1992-93 driveshafts is larger. When you install the new outer CV joint on a 1992-93 driveshaft, the distance from the end of the splines to the inner race of the joint should be 9 +/-0.5 mm. See Fig 1 .

Fig 1: Spline End to Inner Race Measurement

NOTE: Since the 1990-91 driveshafts will supersede to the 1992-93 type, it is best to measure the distance before you remove the old CV joint.